Pleasanton Temp Power Rentals
Temp services, light towers and portable cooling for Pleasanton office campuses, retail pads and new homes through the hot Tri-Valley summer.
Pleasanton work and the summer heat
Pleasanton jobs range in size. Office and lab conversions go on in the business parks near the I-580 and I-680 interchange, retail pads get rebuilt along the main roads, and new homes fill the edges of town. Most need a single-phase pole at the start, with three-phase on the larger commercial work.
Heat is the biggest difference from Fremont. Tri-Valley summer afternoons often climb into the 90s and sometimes past 100, which makes a trailer without cooling useless and pushes concrete crews to start early. We plan cooling and lighting at the same time as the pole, because they tend to be needed the same week and share the same power.
The building division at the City of Pleasanton reviews the electrical permit, and we send PG&E the service request as soon as it is filed. A released meter usually follows in two to four weeks. Some business parks have owner rules on equipment placement and delivery hours, so we ask for those before the install. A pole that blocks a tenant’s loading dock gets moved at the GC’s cost, and nobody wants that bill.
Request Equipment Pricing
What Pleasanton jobs need first
Spot coolers for trailers and interiors
A 2 to 5 ton unit keeps a trailer usable and holds a building interior steady for drywall and flooring. Our Tri-Valley spot cooler rentals include ducting and condensate setup, and we check the units on long rentals.
Towers for pre-dawn concrete
In July, many pours start in the dark to beat the heat. Diesel or solar towers light the pad and the truck path, using our light towers for early slab pours, dropped the afternoon before.
A pole for a retail pad
A rebuilt store or restaurant pad usually needs a 200A service and a quick removal at the end. We handle temp poles for commercial pads from the permit to the PG&E disconnect.
Pleasanton permits and site rules
Temporary services in Pleasanton need a city electrical permit. After the panel and grounding are done we put in for the inspection and follow it until the city signs off, then confirm the meter release with PG&E. On a retail pad that can be the step that decides the opening date, so we chase it hard. On a retail pad that can be the step that decides the opening date, so we chase it hard.
On long rentals of larger generators, we review whether the unit falls under BAAQMD permit rules. Check with the property owner as well, since some business parks limit generator run times near occupied buildings.
Typical Pleasanton costs
Pleasanton single-phase poles are typically priced from $1,800 to $4,500 with the permit and inspection included. Commercial 400A three-phase services usually fall between $6,000 and $14,000, with larger jobs above that. Spot coolers rent for about $250 to $700 a week.
- Cooling tonnage and how many units run at once
- Pole size and phase
- Weeks of tower rental and fuel
- PG&E fees, billed by the utility
Pleasanton temp power questions
How big a spot cooler does an office trailer need?
A standard single-wide trailer usually does fine with 1 to 2 tons. A double-wide in full sun in Pleasanton may need 3 tons or two smaller units.
Can you heat the same space in winter?
Yes. We swap spot coolers for portable heaters when the season turns, so a drywall or flooring crew keeps the right conditions.
Will a spot cooler run off the temp pole?
Most will, if the pole was sized with the cooler in mind. Tell us the tonnage early so the panel has the right breakers and receptacles.
Equipment we deliver to Pleasanton
Schedule power in Pleasanton
Call 510-961-6012 or send the form and we will line up delivery.